Measurement Equipment (nuclear radiation)
The Radalert 50
The
Radalert 50, our most popular product, is a general purpose
geiger counter. It measures alpha, beta, gamma, and x-radiation.
Its digital display shows readings in your choice of counts
per minute (cpm) or mR/hr, up to 50,000 cpm or 50 mR/hr,
or in accumulated counts. A red LED blinks and a beeper
chirps with each count (the chirp can be muted). An audible
alert sounds when the radiation reaches a user-adjustable
level. The Radalert 50 meets CE certification requirements
for Europe.
IDR-radalert50
$425.00
Use
the Radalert 50 to:
- Monitor personal radiation exposure
- Monitor an area or perimeter
- Detect radiation leaks and contamination
- Ensure regulatory compliance
- Monitor changes in background radiation
- Demonstrate principles of nuclear physics
- Check for radioactive minerals in the
Earth
Specifications:
Sensor:
Halogen-quenched Geiger-Meuller detector with mica end
window (LND712); detects Alpha, Beta, Gamma, and X-radiation.
End window density is 1.5-2.0 mg/cm². Side wall is .012"
#446 stainless steel.
Display:
4-digit liquid crystal display with mode indicators
Operating
range: mR/hr: .001-50.00 mR/hr (Cs-137); CPM: 0-50,000;
Total: 0-60,000 counts
Calibration:
Cesium 137 (gamma)
Sensitivity:
1000 cpm/mR/hr referenced to Cs-137
Accuracy:
±10% typical; ±15% max.
Alert:
User-adjustable alert level is set using three buttons
Count
light: Red LED flashes with each count
Beeper:
Chirps for each count (can be muted)
Outputs:
Dual miniature jack sends counts to computers, data loggers,
several educational data collection systems and other
CMOS-compatible devices. Submini jack provides audio output
to an external earpiece, amplifier, or tape recorder.
Power:
One 9-volt alkaline battery
Size:
150 x 80 x 30 mm (5.9 " 3.2"x 1.2")
Weight:
225 grams (8 oz) including battery
Options:
European SI units (mSv/hr); Computer cable and software
(IBM PC compatible)
Specifications subject to change without
notice.
The Inspector
Handheld Surface Contamination
Monitor
IDR-Inspector
$490.00
> 
The
Inspector measures alpha, beta, gamma, and x radiation using
a 2-inch pancake GM detector with high sensitivity to common
beta and alpha sources. The easy-to-read digital display
shows readings in your choice of mR/hr, CPM, CPS, or m Sv/hr.
The Inspector automatically compensates for GM tube dead
time. Anti-saturation circuitry prevents jamming in high
radiation fields. The Inspector meets CE certification requirements
for Europe.
The Total/Timer
feature takes timed readings for periods from one minute
to 24 hours for precise measurement of low-level contamination.
Our "safety first" calibration feature can eliminate radiation
exposure to the calibration technician.
Specifications:
Detector: Halogen-quenched
Geiger-Mueller tube. Effective diameter 1.75" (45 mm).
Mica window density 1.5-2.0 mg/cm²
Display: 4-digit liquid
crystal display with mode indicators
Averaging Periods: Display
updates every 3 seconds, showing the average for the past
30-second time period at normal levels. The averaging
period decreases as the radiation level increases. User
can select fast 3-second averaging period.
Operating Range:
mR/hr: .001 to 100.0; CPM: 0 to 300,000; Total: 1
to 9,999,000 counts; mSv/hr: .01 to 1,000; CPS: 0 to 5,000
Efficiency: Sr-90
(546KeV, 2.3MeV b max): approx. 75%; C-14 (156KeV b max):
approx. 11%; Bi-210 (1.2 MeV b max): approx. 64%; Am-241
(5.5 MeV a): approx. 36%
Sensitivity: 3500
CPM/mR/hr referenced to Cs-137
Accuracy: ± 15%
Timer: Can set 1-10
minute sampling periods in 1-minute increments, 10-50
minute sampling periods in 10-minute increments, and 1-24
hour sampling periods in 1-hour increments
Count Light: Red LED
flashes with each radiation event
Audio: Beeper beeps
with each radiation event; can be muted
Outputs: Dual miniature
jack drives CMOS or TTL devices, sending counts to computer
or data logger. Submini jack allows for electronic calibration.
Anti-Saturation:
Readout holds at full scale in fields up to 100 times
the maximum reading
Temperature Range:
-10° to +50° C , 14° to 122° F
Power: One 9-volt
alkaline battery; battery life is minimum 200 hours at
normal background, minimum 24 hours at 1 mR/hr
Size: 150 x 80 x 30
mm (5.9"; x 3.2"; x 1.2")
Weight: 350 grams
(12.5 oz) with battery
Option: Wipe Test
Plate; Computer cable and software (IBM PC compatible)
Measurement Equipment (nuclear radiation)
The Radalert 50
| The Radalert 50, our most popular product, is a general purpose geiger counter. It measures alpha, beta, gamma, and x-radiation. Its digital display shows readings in your choice of counts per minute (cpm) or mR/hr, up to 50,000 cpm or 50 mR/hr, or in accumulated counts. A red LED blinks and a beeper chirps with each count (the chirp can be muted). An audible alert sounds when the radiation reaches a user-adjustable level. The Radalert 50 meets CE certification requirements for Europe. |
|||
| |
Use
the Radalert 50 to:
|
||
|
Specifications: Sensor: Halogen-quenched Geiger-Meuller detector with mica end window (LND712); detects Alpha, Beta, Gamma, and X-radiation. End window density is 1.5-2.0 mg/cm². Side wall is .012" #446 stainless steel. Display: 4-digit liquid crystal display with mode indicators Operating range: mR/hr: .001-50.00 mR/hr (Cs-137); CPM: 0-50,000; Total: 0-60,000 counts Calibration: Cesium 137 (gamma) Sensitivity: 1000 cpm/mR/hr referenced to Cs-137 Accuracy: ±10% typical; ±15% max. Alert: User-adjustable alert level is set using three buttons Count light: Red LED flashes with each count Beeper: Chirps for each count (can be muted) Outputs: Dual miniature jack sends counts to computers, data loggers, several educational data collection systems and other CMOS-compatible devices. Submini jack provides audio output to an external earpiece, amplifier, or tape recorder. Power: One 9-volt alkaline battery Size: 150 x 80 x 30 mm (5.9 " 3.2"x 1.2") Weight: 225 grams (8 oz) including battery Options: European SI units (mSv/hr); Computer cable and software (IBM PC compatible) Specifications subject to change without notice. |
The Inspector
Handheld Surface Contamination
Monitor
| IDR-Inspector | $490.00 |
| > |
|
| The Inspector measures alpha, beta, gamma, and x radiation using a 2-inch pancake GM detector with high sensitivity to common beta and alpha sources. The easy-to-read digital display shows readings in your choice of mR/hr, CPM, CPS, or m Sv/hr. The Inspector automatically compensates for GM tube dead time. Anti-saturation circuitry prevents jamming in high radiation fields. The Inspector meets CE certification requirements for Europe. | |
|
|
The Total/Timer feature takes timed readings for periods from one minute to 24 hours for precise measurement of low-level contamination. Our "safety first" calibration feature can eliminate radiation exposure to the calibration technician. |
| Specifications:
Detector: Halogen-quenched
Geiger-Mueller tube. Effective diameter 1.75" (45 mm).
Mica window density 1.5-2.0 mg/cm² Display: 4-digit liquid
crystal display with mode indicators Averaging Periods: Display
updates every 3 seconds, showing the average for the past
30-second time period at normal levels. The averaging
period decreases as the radiation level increases. User
can select fast 3-second averaging period. Operating Range:
mR/hr: .001 to 100.0; CPM: 0 to 300,000; Total: 1
to 9,999,000 counts; mSv/hr: .01 to 1,000; CPS: 0 to 5,000
Efficiency: Sr-90
(546KeV, 2.3MeV b max): approx. 75%; C-14 (156KeV b max):
approx. 11%; Bi-210 (1.2 MeV b max): approx. 64%; Am-241
(5.5 MeV a): approx. 36% Sensitivity: 3500
CPM/mR/hr referenced to Cs-137 Accuracy: ± 15% Timer: Can set 1-10
minute sampling periods in 1-minute increments, 10-50
minute sampling periods in 10-minute increments, and 1-24
hour sampling periods in 1-hour increments Count Light: Red LED
flashes with each radiation event Audio: Beeper beeps
with each radiation event; can be muted Outputs: Dual miniature
jack drives CMOS or TTL devices, sending counts to computer
or data logger. Submini jack allows for electronic calibration.
Anti-Saturation:
Readout holds at full scale in fields up to 100 times
the maximum reading Temperature Range:
-10° to +50° C , 14° to 122° F Power: One 9-volt
alkaline battery; battery life is minimum 200 hours at
normal background, minimum 24 hours at 1 mR/hr Size: 150 x 80 x 30
mm (5.9"; x 3.2"; x 1.2") Weight: 350 grams
(12.5 oz) with battery Option: Wipe Test
Plate; Computer cable and software (IBM PC compatible) |
To Purchase Our Products Please Proceed to the Order Form
Corporate Office:
Biofeedback Instrument Corporation
255 W. 98 Street
New York, NY 10025
(212) 222-5665