|
BioExplorer
Neurofeedback and Biofeedback software with multimedia, statistical, and report capabilities.
List Price: $425; Your Price: 400.00 Add to Cart | View Cart | Checkout
Detailed Description
BioExplorer is the Next Generation of Software for reading and processing biological signals.
Design protocols without limitations, by linking objects together into designs.
Output includes DVDplayer, CD Player, MIDI player, tone generator, video player, bars, graphs, spectrogram, and more.
BioExplorer Overview
View a list of Objects
Download a Trial Version of BioExplorer
BioExplorer
Overview
BioExplorer allows you to process and
display data from your WaveRider any way you want. You
can work with data received from one or more WaveRiders in
real time, or play back and analyze a previously recorded
session.
BioExplorer uses a 'Design' to tell it what to do with data
from your WaveRider. A Design consists of a Signal
Diagram and a set of Instruments.
You graphically create a Design by adding objects to the Signal Diagram and wiring them together.
Then configure your Design by double clicking objects
to set their properties. Here's an example of the
Bandpass Filter property page:
If any of the objects added to the Signal Diagram have
user interfaces, or Instruments, they are automatically added
to the Instruments window. You can position these
however you want.
When you have the Instruments positioned, just press
play to process and display data from your WaveRider in real
time!
If you record your session, you can replay it and
display statistics and trends for any signal in the Signal
Diagram.
Download a Trial Version of
BioExplorer
BioExplorer Objects
The real
power of BioExplorer comes from the ability to connect signal
processing and display objects any way you want.
The following objects are available for use in the Signal
Diagram:
AND
The output is the logical AND of two or more
signals
Audio Player NEW!
Plays audio files (mp3, wma,
wave, midi, etc.) Volume and Play/Pause can be
controlled by one or more signals.
Averager
Calculates the average value of a signal
over a specified time period.
Bandpass Filter
Filters a signal, allowing
frequency components that are between the low band edge and
the high band edge to pass through, and attenuating components
outside this range. Outputs the filtered signal as well
as the amplitude of that signal.
Bar Graph
Graphically indicates the current value
of a signal.
CD Player NEW!
Plays audio CDs. Volume
and Play/Pause can be controlled by one or more signals
Coherence NEW!
Calculates the coherence
between two signals.
Continuous MIDI NEW!
Plays a continuous MIDI
note. Volume, Pitch, and Play/Pause can be controlled by
one or more signals.
Correlation
Calculates the correlation between
two signals.
Counter
Counts properties of a signal (rising
edges, falling edges, time high or time low).
Difference
Outputs the difference between the
current sample and the previous sample.
Dominant Frequency
Calculates the dominant
frequency (the frequency component with the largest amplitude)
of a signal.
DVD Player NEW!
Plays DVDs. Volume and
Play/Pause can be controlled by one or more signals
Expression Evaluator
Uses a user-defined
expression to calculate the output based on one or more
signals, e.g. '( In2 - In1 ) / (In1 + In2 )'.
Mean Frequency NEW!
Calculates the mean frequency
in a given bandwidth.
Meter
Indicates the current value of a
signal.
MIDI
Plays musical notes at a periodic
rate. The volume, note, and timing can be controlled by
one or more signals.
NOT
The output is the logical NOT of a
signal.
OR
The output is the logical OR of two or more
signals.
Oscilloscope
Displays one or more signals over
time.
Power Ratio
Calculates the ratio of the power in
two frequency bands, or the percent of the total power
contained in one frequency band of a signal.
Pulse Detector
Given an EKG signal, determines
the current pulse rate.
Source
This object represents a channel on a
device (e.g. BrainMaster channel 1, etc). Source objects
are used to get data from a device into the Signal
Diagram.
Spectrum Analyzer
Displays the spectrum of a
signal. Currently supports four different modes:
spectrogram (shown below), bins, compressed spectral array,
and 3D.
Standard Deviation
Calculates the Standard
Deviation and Mean of a signal over a specified time
period.
Threshold
This object compares a signal to a
threshold. You can set the threshold manually or have
the object adjust it automatically based on characteristics of
the signal.
Tone Generator NEW!
Generates an audio
tone. Frequency, Volume, and Play/Pause can be
controlled by one or more signals.
Video Player NEW!
Plays video files (mpeg, wmv,
avi, etc.) Volume and Play/Pause can be controlled by
one or more signals
Download a Trial Version of
BioExplorer
|
